|
PlugPhones motorcycle ear plug speakers
|
Earphone System for
Motorcyclists
|
-
Filter earplug speaker system
-
Remain aware of road traffic noise
-
Low-frequency balance system
-
Attenuates ambient noise by 20dB*
-
Generic fit “one-size-fits-all”
-
High level of comfort
 |
|
The earphone
system will attenuate ambient noise by up to
20dB with a very high level of comfort - even
under close fitting helmets. For integration
into a starcom system we supply full face and
open face headsets to provide the microphone and
starcom connection with a socket to connect the
PlugPhones into the system.
|
|
Part number
PP-10 (PlugPhones with stereo 3.5mm jack
plug)
Part number
PP-14 (PP-10 including PP-04 StarCom1 full
face helmet kit with bud mic and stereo jack
socket to accept PlugPhones and HSEX-01)
Part number
PP-16 (PP-10 including PP-06 StarCom1 open
face helmet kit with boom mic and stereo jack
socket to accept PlugPhones and HSEX-01)
For pricing please see
price lists >>
|
|
 Tecstar
PlugPhones are designed to combine a high-quality,
acoustically compensated ear speaker with a generic
ear plug for use on motorcycle sound systems. Two
types of ear-tips are included. To compensate for
differences of ear volume, low-frequency
compensation filters have been designed to provide
the optimum bass response. Four different sizes are
supplied and should be selected empirically on the
basis of personal preference. |
 |
Multifilament eartips that provide an exceptional
fit, especially in ear canals with complex shapes.
Made from Thermoplastic Elastomer these eartips will
also address problems that may be associated with
“mobile ear canals” a condition that afflicts
individuals where the ear canal moves with jaw
movement or when a crash helmet is worn.
2x Included with the PP kits |
|
Specifications
Driver: Closed dynamic 10mm Mylar Film
Power Handling: 20mW
Sensitivity: 95+/-3dB @ 1mW
Impedance: 32 Ohms @ 1kHz
Response: 100Hz – 15kHz +/- 3dB (into 2cc
coupler)
Cable Length: 1.2M
Connector: 3.5MM gold-plated stereo
Weight: 11 g
Ambient attenuation: Better that 20dB when
Plugphones
are fitted correctly
|
 |
Triple
Flange Silicon Ear tips for use with Plugphones and
many other propriety ear pugs and monitors
2x Included with the PP kits |
 |
Formable
Foam Eartips
Optional. Note included in the
standard kits. |
|
Using the PlugPhones
Place the foam (or silicon) inserts on each of
the drivers by sliding it onto the acoustic tube
as far as it will
go. You will probably need to cut them to obtain
the optimum fit – do this in very small
increments.
Insert the smallest LF compensation filter of
the same size into the hole at the back of each
driver. These are
moulded onto the translucent tree of small parts
that come
with you
PlugPhones.
Be careful – these are very
small.
If you feel that you would like more
low-frequency – replace the compensation filter
with the next size up.
|
|
 |
PlugPhone low-frequency Compensation Filters with 4
graduation levels.
These are used to adjust the low
frequency characteristics of the Plugphones and the
amount of outside sound you hear so you remain aware
of road traffic noise
|
