ConnectivityRider to Passenger With 2x BT GO kit’s full duplex rider to passenger intercom conversation is provided. In this configuration both Rider and Passenger can have their Bluetooth mobile phones connected. When a phone call occurs the phone will auto answer (if phone has auto answer) and the Bluetooth connection will switch to the phone, when the call is terminated the Bluetooth connection will revert to rider passenger intercom. Bike to Bike With 2x BT GO kit’s full duplex bike to bike (rider to rider) intercom conversation is provided. The working range is typically 150m. In this configuration both Rider and Passenger can have their Bluetooth mobile phones connected. When a phone call occurs the phone will auto answer (if phone has auto answer) and the Bluetooth connection will switch to the phone, when the call is terminated the Bluetooth connection will revert to rider passenger intercom
Sole Rider Mobile Phone; if your phone is Bluetooth enabled, if the phone has music and or GPS available via bluetooth then these feature will also be active through the BT GO or MP3; BT GO is A2DP enabled and will connect to a MP3 stereo music device and allow great quality stereo music to be played on the move. or Sat Nav; Connect to a Bluetooth enabled GPS and have voice commands via Bluetooth and if the GPS system includes MP3 and a Phone connection then these feature will work through BT GO. General The BT GO can connect up to 4 Bluetooth devices one of which can be a second BT GO, only 1 device can be active at a time, some switching between devices is automatic for example when working as a intercom and a phone call occurs BT GO will automatically switch to the phone for the duration of the call and then back to the intercom once the call is terminated. BT GO provides for press button control of source switching but this must not be used while on the move. Source switching is dependant on the Bluetooth device having this feature
1) Find the best position to insert the mount clip on the LEFT side of the crash helmet. The clip is fixed by inserting between the shell and the lining of the helmet. This normally means pushing the metal clip into the adhesive holding the lining to the helmet shell. 2) Insert the rubber mounting gasket between the metal clip and the helmet shell as shown. This should be positioned such that the metal clip lines up with the recess in the rubber gasket 3) Insert the BT-GO unit into the bracket and then push left and then down to the lock position. The BT-GO can then be easily inserted and removed as required.Specification _________________ Audio output power: Max1/4 Watt into each headset speaker Operating Range: better than 150M in most conditions Power supply: 3.7V DC 500mAh internal rechargeable Visual indication: Front panel LEDs, Power consumption:Intercom operation: 60mA typical Operating time: 7 Hours typical Dimensions: (WxHxD) 90x35x25mm (2 3/4” x 3/4 ” x 1/2”) Weight: Approx 50g Operating temp: -10 to +55ºC _______________________________________________________________________________________________________ © 2009 www.starcom1.com.au
|
