The BKT-01 mounting
bracket allows for:
2 x HSEX-04 and/or the HSEX-05 (not included)
1 x EXT-01 (not included)
bulkhead headset cables to be fixed to the bike
frame in a suitable position, without the
requirement of cutting a mount hole.
See ProFit-01 for complete
kit.
Fixing
instructions
The bracket should
be fixed to a convenient position on the bike frame
(section 20-25mm diameter). Place the P-clip around
the selected frame section, place the plate in
front and push the bolt through the plate and
p-clip, place the washer onto the bolt then the
shake-proof washer and then the nut, tighten nut,
ensure the plate is square and then fully tighten.
Mount the bulkhead connectors and secure with hex
nut.
|
